Product Description: 

Our 45 x 95mm Treated Sawn Timber is a strong, versatile pressure treated softwood supplied in 2.4m lengths. Suitable for stud walls and partitions, internal framing, noggins and wall plates, shed and workshop construction, fence framing, decking substructures, and general landscaping and outdoor timber work, it is used across both construction and DIY projects.

This is the standard section for stud partition work, and the 2.4m length matches typical ceiling heights, so studs can often be used full length with little or no cutting and the offcuts from head and sole plates go straight into noggins. At 95mm deep it gives a solid fixing for plasterboard on both faces while leaving room in the cavity for insulation and services, and it is light enough to handle, cut, and fix single-handed.

Pressure treatment drives preservative deep into the timber under vacuum rather than leaving it sitting on the surface, protecting against fungal decay, rot, and insect attack, and allowing the timber to be used outdoors and in damp locations as well as internally. The sawn finish is left rough from the saw, which suits structural work where strength matters more than appearance and keeps the cost below planed or regularised stock. Fix with galvanised or stainless nails and screws, as the preservative will corrode untreated steel over time, and treat any cut ends with end grain preservative.

Specification: